Guide

How to Use a Breville Juicer

Updated on · By the Best Juicer Review team

To use a Breville juicer, lock the cover on the motor base, set the jug under the nozzle, and choose low or high speed before feeding produce through the chute. Push food with the food pusher only, then unplug and hand wash the basket and parts.

On this page (8 sections)
  1. How do you set up a Breville juicer before the first batch?
  2. Which speed should you use for which produce?
  3. How do you feed produce into the chute safely?
  4. How do you juice straight into a glass without a mess?
  5. How do you clean a Breville juicer after juicing?
  6. How do you store and reassemble the juicer?
  7. What should you do when the juicer stops or slows down?
  8. The short version of using a Breville juicer

To use a Breville juicer, lock the cover onto the motor base, set the juice jug under the nozzle, and pick low or high speed before you feed any produce. Push food down with the food pusher only, then unplug the machine and hand wash the filter basket and parts.

This guide walks through a Breville centrifugal juicer from setup to cleanup. The steps match the Juice Fountain Cold, though the order works for most Breville juicers you'll use at home.

How do you set up a Breville juicer before the first batch?

Assemble the bowl, filter basket, cover, and pulp container first, then lock the safety arm. The juicer won't start unless the cover is locked into place.

  1. Place the motor base on a dry, flat counter near an outlet.
  2. Set the filter bowl surround on the base and drop in the stainless steel filter basket.
  3. Fit the juicer cover so the feed chute sits over the basket.
  4. Lock the interlocking safety arm. The motor won't run until it's secure.
  5. Slide the pulp container under the rear outlet and the juice jug under the nozzle.

Breville includes the 70 fl oz Easy seal juice jug with froth separator, the detachable spout, and a cleaning brush in the box. Keep the jug's sealing lid handy so you can store juice right after a batch.

Give the juicer 850 watts of clear counter space and a spot where the cord won't cross a walkway. The unit measures about 8 in deep, 13.6 in wide, and 16.7 in high, so allow headroom to lift the cover off.

Which speed should you use for which produce?

Use high speed for dense fruits and hard vegetables, and low speed for leafy greens and soft fruit. The Juice Fountain Cold has a two-speed electronic button control.

Produce typeSpeedExamples
Dense and hardHighCarrots, apples, oranges
Leafy and softLowSpinach, kale, berries

Start on low when you aren't sure. You can switch to high before the next piece without stopping the whole routine.

The 3 inch extra wide chute takes whole carrots, apples, and oranges, so most prep is just washing. Cut anything that won't fit, and remove pits and hard rinds that could strain the basket.

Breville calls the design a cold extraction system with Cold Spin Technology and an Italian-made precision mesh filter. The brand says this approach avoids heat damage to vitamins and minerals during juicing.

How do you feed produce into the chute safely?

Feed one or two pieces at a time and use the food pusher, never your fingers. Steady feeding keeps the motor from overloading and gives cleaner juice.

Turn the juicer on and let the motor reach speed before adding food. Drop pieces into the chute, then press gently with the food pusher.

Don't ram hard produce or pack the chute full. Give the basket time to clear between handfuls, especially with fibrous greens.

Watch the pulp container as it fills. Empty it before it packs tight, since a full container can back pulp up into the bowl.

Stop the juicer and unplug it before you reach for anything stuck in the chute or basket. A quick clear-out now beats forcing a jammed piece through.

How do you juice straight into a glass without a mess?

Flip the juice nozzle out and position your glass under it, then invert the nozzle when you finish. The Juice Fountain Cold's detachable spout lets you skip the jug for a single serving.

Set the glass on the base tray so it stays steady while the juicer runs. Juice flows straight from the nozzle, and inverting it afterward stops drips onto the counter.

For batches, use the 70 fl oz jug and its froth separator. The separator holds back foam so you can pour clearer juice, and the sealing lid lets you store the rest.

Breville says juice sealed in the jug keeps in the refrigerator for up to three days. Chill it quickly and keep the lid on between pours.

How do you clean a Breville juicer after juicing?

Unplug the juicer first, then hand wash every part that touched produce. Breville lists hand wash only for this model, so skip the dishwasher.

Take the juicer apart in reverse order: pulp container, juice jug, cover, filter basket, and bowl. Rinse each piece right away so pulp doesn't dry onto the mesh.

Use the included cleaning brush on the stainless steel filter basket. Hold the basket under running water and brush from the inside out, following the mesh rather than scrubbing across it.

Wipe the motor base with a damp cloth only. Never put the base or cord in water, and let all parts air dry fully before you reassemble.

What helps get the filter basket really clean?

The mesh basket holds the most pulp, so a small brush that reaches into the mesh and rim helps more than a sponge. The OXO set's small brush has a compact bristle head for tight spots.

The set's large brush suits the pulp container and sink area. The small brush's pointed bristle profile gets into the basket's rim and around the center hub.

Skip it if you already have a stiff brush that fits the basket. Rinse the brushes after each use so old pulp doesn't transfer back onto the mesh.

How do you clear pulp from the chute and bowl edges?

A narrow brush gets into the chute, nozzle, and bowl seams where pulp collects and a cloth can't reach. The Betanull set includes crevice brushes for gaps like these.

Its right-angle brushes work on the juice jug and cup interiors. The set also has wire brushes, but keep those away from the plastic parts and the fine mesh.

Skip this set if you want one simple brush for the whole job. Store the brushes dry and hang them by their handle holes between juicing sessions.

How do you store and reassemble the juicer?

Let every part dry completely, then stack the basket, bowl, and cover back on the base. Damp parts trap odor and can leave water in the nozzle.

Keep the pulp container and juice jug nearby so the next batch is quick to start. Store the cleaning brush with the juicer so you don't hunt for it later.

Leave the cover unprotected while stored. Lock the safety arm only when you're ready to juice, so the interlock stays clean and free of crumbs.

Check the mesh basket for stray pulp before the next use. A clean basket lets juice flow freely and keeps the machine running smoothly.

What should you do when the juicer stops or slows down?

Unplug the juicer and clear the basket and chute first when the motor stops or the juice slows to a trickle. The LED light on the BJE430SIL comes on when the motor has stopped due to overloading.

Overloading usually means too much produce went in too fast or the pulp container filled up. Empty the pulp container, clear the basket, and let the motor cool before restarting.

Feed smaller amounts and use the right speed next time. Fibrous greens and starchy produce load the basket faster, so slow your pace with those.

If juice still won't flow after a clear-out, work through the causes in our guide to why a juicer keeps clogging. A wet basket or packed mesh is the usual culprit.

Before you buy or upgrade a machine, read is a Breville juicer good to see how the brand's models compare. Shoppers weighing slower machines can also look at the best cold press juicers for home use and check whether cold press juicers are quiet.

The short version of using a Breville juicer

The routine for how to use a Breville juicer comes down to assemble and lock the cover, match the speed to the produce, feed with the pusher, and hand wash the basket. Most jams trace back to overfilling or a mesh basket that wasn't cleaned.

Pick low speed for leafy greens and soft fruit, and high speed for carrots and apples. Juice into a glass with the nozzle for one serving, or use the sealed jug for a family batch you'll chill.

Clean the basket with a small brush as soon as you finish. Unplug the machine, hand wash every part, dry it fully, and store it unprotected until the next batch.

Frequently asked questions

Do I have to cut fruit before juicing in a Breville?

No, the 3 inch feed chute on the Juice Fountain Cold takes whole carrots, apples, and oranges. Cut anything wider than the chute, and remove pits, thick stems, and hard rinds first.

Which speed should I use on a Breville juicer?

Use high speed for dense produce like carrots and apples, and low speed for leafy greens and soft fruit. The two-speed button control on the BJE430SIL lets you switch before each batch.

How long does fresh Breville juice keep?

Breville says juice sealed in the included 70 fl oz jug keeps in the refrigerator for up to three days. Chill it right after juicing and keep the sealing lid on.

Can I put the Breville filter basket in the dishwasher?

No. Breville lists hand wash only for the juicer's parts, so rinse the stainless steel filter basket and brush it under the tap.

Let every piece dry fully before you store it.

What does the LED light on a Breville juicer mean?

The LED light comes on when the motor has stopped because of overloading. Unplug the juicer, clear the pulp or hard pieces from the basket and chute, let the motor cool, then restart with less produce at a time.